Referências
01 - Leucci et al. (2015) - Integrated Archaeogeophysical Approach for the Study of a Medieval Monastic Settlement in Basilicata
The paper deals with the results of an archaeo-geophysical approach adopted for the study and the reconstruction of the architectural plan of the medieval monastery of San Pietro a Cellaria in Calvello (Basilicata, Southern Italy). The monastery is a remarkable witness to Benedectine architecture of the 12-13th century in Basilicata, built by monks of the Congregation of S. Maria di Pulsano, who were active mainly in southern Italy. The historical data and the diachronic architectural study, based on the analysis of building techniques, provide evidence for a long and intense history, during which the monastery underwent several architectural changes, including the demolition of buildings and the superposition of other constructional elements. The only preserved medieval remains are a church with a nave; the adjacent structures are more recent. This preliminary data prompted a research project to shed new light on the as yet unknown history of the medieval monastery. Specifically, a remote sensing approach around the monastery including aerial survey by unmanned aerial vehicle (UAV), ground-penetrating radar (GPR) and geomagnetic survey in gradiometric configuration (MAG), was adopted in order to verify the possible existence of buried masonry structures and other possible features of archaeological interest, including channels and aqueducts. The GPR time slices were constructed from closely spaced parallel profiles. The time slices, computed by averaging radar reflections over vertical time windows several nanoseconds thick, are used to map subsoil features associated with the structures, probably of anthropogenic origin. To facilitate the interpretation of the results, a threedimensional image was constructed using closely spaced parallel profiles, which are linearly interpolated. The MAG survey was carried in gradiometer configuration, in order to study magnetic properties of the shallow subsoil. Ground-penetrating radar gives details about archaeological structures in a limited area where survey was possible, while gradiometer survey confirms GPR results and improves archaeological knowledge in the areas where GPR survey was impossible. This multi-sensor remote sensing program revealed a wide variety of archaeological features of interest, which may be targeted accurately with excavations in the future.
02 - Goodman (1994) - Ground-penetrating radar simulation in engineering and archaeology
Forward modeling of ground penetration radar is developed using exact ray‐tracing techniques. Structural boundaries for a ground model are incorporated via a discrete grid with interfaces described by splines, polynomials, and in the case of special structures such as circular objects, the boundaries are given in terms of their functional formula. In the synthetic radargram method, the waveform contributions of many different wave types are computed. Using a finely digitized antenna directional response function, the radar crosssection of buried targets and the effective area of the receiving antenna can be statistically modeled. Attenuation along the raypaths is also monitored. The forward models are used: “1” as a learning tool to avoid pitfalls in radargram interpretation, (2) to understand radar signatures measured across various engineering structures, and (3) to predict the response of cultural structures buried beneath important archaeological sites in Japan.
03 - Grasmueck et al. (2005) - Full-resolution 3D GPR imaging
Noninvasive 3D ground-penetrating radar (GPR) imaging with submeter resolution in all directions delineates the internal architecture and processes of the shallow subsurface. Full-resolution imaging requires unaliased recording of reflections and diffractions coupled with 3D migration processing. The GPR practitioner can easily determine necessary acquisition trace spacing on a frequency-wavenumber (f-k) plot of a representative 2D GPR test profile. Quarter-wavelength spatial sampling is a minimum requirement for full-resolution GPR recording. An intensely fractured limestone quarry serves as a test site for a 100-MHz 3D GPR survey with 0.1 m × 0.2 m trace spacing. This example clearly defines the geometry of fractures in four different orientations, including vertical dips to a depth of 20 m. Decimation to commonly used half-wavelength spatial sampling or only 2D migration processing makes most fractures invisible. The extra data-acquisition effort results in image volumes with submeter resolution, both in the vertical and horizontal directions. Such 3D data sets accurately image fractured rock, sedimentary structures, and archeological remains in previously unseen detail. This makes full-resolution 3D GPR imaging a valuable tool for integrated studies of the shallow subsurface.
04 - Duarte et al. (2012) - Viabilidade da aplicação do GPR para o mapeamento de camadas de bauxita laterítica e de goethita
O método eletromagnético GPR foi testado no mapeamento de camadas em depósitos de minérios, localizados em dois diferentes ambientes geológicos. Foram realizadas medidas com o intuito de mapear camadas que compõem depósitos de origem supergênica de bauxita laterítica e goethita. Os levantamentos para o mapeamento das camadas de bauxita foram realizados no município de Paragominas, no Pará. As medidas para o mapeamento das camadas de goethita foram realizadas no interior de uma fazenda particular, localizada entre os municípios de Xambioá e Vanderlândia, estado do Tocantins, próximo ao Cinturão Araguaia. O estudo teve como principal objetivo identificar os parâmetros profundidade e espessura das zonas mineralizadas, que podem auxiliar no trabalho de explotação dos minérios. Os resultados obtidos podem ser considerados bastante satisfatórios, pois o método apresentou boa resposta para os dois tipos de minérios investigados, tornando-se possível a caracterização das camadas e a verificação de suas profundidades e espessuras.
05 - Albuquerque et al - 2019 - Caracterização de Barragens de Rejeito Usando Geofísica Rasa Aplicação na Barragem B1 de Cajati - São Paulo
Barragens de rejeito são estruturas muito usadas em Mineração. Estas estruturas são monitoradas diariamente por instrumentos como: piezômetros, marcos topográficos e medidores de nível d’água. No Brasil, a utilização de geofísica para avaliação e monitoramento de barragens de mineração não é uma prática usual. A Barragem B1, que faz parte do Complexo Mineroquímico de Cajati (Mosaic Fertilizantes), no estado de São Paulo, foi escolhida para avaliação do uso de eletrorresistividade. O presente trabalho visa discutir os resultados geofísicos desta barragem, assim como, analisar a aplicabilidade do método geofísico como forma de avaliar as condições internas do maciço da estrutura. A Barragem trata-se de um maciço zoneado com septo argiloso impermeável, tendo a jusante um material permeável constituído por rejeitos de calcário. Inicialmente, foram levantados 8 perfis de caminhamento elétrico. Com uma análise desses perfis, observou-se uma zona de baixa resistividade – ZBR nas duas primeiras seções, correspondendo com a cota do aterro argiloso. Estas cotas estão coerentes com o nível de água normalmente observado nos Indicadores de Nível D’água localizados junto à crista da barragem. Foram observadas em algumas seções ZBRs, tanto junto à ombreira direita bem como junto à ombreira esquerda. A fim de aprofundar a investigação a cerca destas ZBRs, uma nova campanha foi feita cobrindo a ombreira esquerda. Através de análises mais profundas dos projetos de engenharia, foi obtida a informação de que foram mantidos os canais de descarga de extravasores antigos, sendo preenchidas por um tapete drenante, passando a servir de drenos. As ZBRs, observadas nas seções, coincidem com estas estruturas, possivelmente condicionadas pela percolação de água. Observa-se que os dados obtidos com a aplicação de Eletrorresistividade estão coerentes com a estrutura do maciço, estando em harmonia com as medições dos instrumentos que monitoram a barragem. A geofísica, como demonstrado, complementa a instrumentação da barragem, dá uma visão ampla sobre a distribuição de umidade no maciço e mostra o seu comportamento em trechos que não são cobertos pela instrumentação usual.